Author Topic: Magic Rds + BW Broadcast  (Read 1750 times)

Joris

  • Guest
Re: Magic Rds + BW Broadcast
« Reply #15 on: August 28, 2020, 04:34:39 pm »
Thank you. It seems you've selected Generic UECP as the encoder model. Correct setting for your device is the Readbest.

By the way, your device contains old encoder firmware version. New version 1.5 has been already offered to BW but they haven't updated it yet in their product line.

Code: [Select]
  What's new in version 1.5
============================

  New features:

- real-time output monitoring by RDS Spy via any communication port
- UECP MEC 13, 14 now automatically inserts filler if required
- UECP MEC 24 @ buffer config 0x00 is now ignored if the group is not included in the group sequence

  Bugfixes:

- UECP MEC 0A now toggles RT type bit according to the specification
- UECP MEC 0A now clears entire RT prior to filling by new text
- UECP MEC 17 now works also with DSN parameter set to 0
- UECP MEC 18 now returns sequence counter as well
- UECP MEC 34 fixed
- unwanted sequence counter reset fixed
- EON variant code 13 now includes TA

Whouw! That is the sollution. I used UECP because it's mentioned in the TX-300 V3 manual.

Many thanks!

Joris

  • Guest
Re: Magic Rds + BW Broadcast
« Reply #16 on: August 29, 2020, 05:56:21 pm »
Hmmmmm, it worked for a while. After a few ours the connections was lost. Connection Status: Connecting.  Rebooting the transmitter has no effect. Power the transmitter off and on helps for a few hours. Then the same problem. I think it is a BW Broadcast problem.

Jan

  • Hero Member
  • *****
  • Posts: 621
Re: Magic Rds + BW Broadcast
« Reply #17 on: August 29, 2020, 06:21:54 pm »
This has been already mentioned by somebody, it seems to be a bug of the new BW product line. It is not an RDS issue, I think they have something wrong in the product's TCP stack. You should report that.

Joris

  • Guest
Re: Magic Rds + BW Broadcast
« Reply #18 on: August 29, 2020, 06:46:46 pm »
Thanks. I'll report it to BW Broadcast

Joris

  • Guest
Re: Magic Rds + BW Broadcast
« Reply #19 on: August 30, 2020, 12:55:22 pm »
We will definitely use direct TCP connection rather than HTTP protocol.

For you information it working now ! BW Broadcast support help me.

Configuration working is with 3.6 Version or earlier (not with 3.7 or 3.8):
- Tcp/ip > direct ip of fm sender
- Uncheck bidirectionnal + Autodetect port speed

With this config, i can send all rds information but not receive.

Thank you

Where can i download magic RDS 3.6? With magic RDS 3.8 I have no connection issues with my transmitter. But the refresh of the data is een problem. Maybe it works with version 3.6 as described earlier?

Jan

  • Hero Member
  • *****
  • Posts: 621
Re: Magic Rds + BW Broadcast
« Reply #20 on: August 30, 2020, 09:03:07 pm »
The version 3.6 is nine years old so this procedure doesn't make sense to me. But why not to try it? You can find it here
https://pira.cz/rds/magicrds/MagicRDS_3_6_Setup.exe