Author Topic: Problem TCP/IP control from P275 e FM Scope  (Read 664 times)

n.pison@springo.it

  • Newbie
  • *
  • Posts: 2
Problem TCP/IP control from P275 e FM Scope
« on: June 13, 2024, 09:19:14 am »
Hi all,
I have a P275E Fm Monitor. This hardware works fine with the serial port and the software FM Scope and I configured the IP correctly.
When I try to connect to P275E trough TCP/IP, the FM Scope tells me "Connected to xxx.xxx.xxx.xxx:port" correctly but when a try to click on Tune with frequency selected nothing is happening.
Anyone else have the same problem?

Firmware version of P275E is 7.0.0.3 and the FM Scope is the latest version

Thanks!

Jan

  • Hero Member
  • *****
  • Posts: 1091
Re: Problem TCP/IP control from P275 e FM Scope
« Reply #1 on: June 13, 2024, 11:08:28 am »
Run the Device Installer and make sure the serial port speed is set to 115200. See the device manual for details.

n.pison@springo.it

  • Newbie
  • *
  • Posts: 2
Re: Problem TCP/IP control from P275 e FM Scope
« Reply #2 on: June 14, 2024, 08:04:39 am »
Thanks! Now it's works fine!