Author Topic: automation software integration  (Read 2737 times)


  • Guest
automation software integration
« on: July 16, 2016, 03:45:13 am »

Is it possible to have the PS or other RDS text updated via simple TCP commands?  Or does the software need to implement the complete UECP protocol?  Other encoders I know oif can accept commands like "PS=Several words here" and the encoder takes care of sending the PS text in blocks of 8.



  • Hero Member
  • *****
  • Posts: 867
Re: automation software integration
« Reply #1 on: July 16, 2016, 02:53:04 pm »
Not only the PS, the PIRA encoders can be completely controlled by ASCII commands.

Preferred command for sending a text which has to be showed in the PS is:

DPS1ENQ=Your text here, up to 128 characters<CR>

where CR is Carriage-return character (Chr 13).

The encoder parses the text itself, based on the Dynamic PS 1 mode. The options for the mode are:
  • Mode 0 - Scrolling by fixed blocks of 8 characters
  • Mode 1 - Scrolling by 1 character
  • Mode 2 - Word alignment scrolling
  • Mode 3 - Scrolling by 1 character, text separated by spaces at begin and end

See the Technical manual for complete list of commands and more details.

Greg Davis

  • Guest
Re: automation software integration
« Reply #2 on: October 03, 2016, 09:50:45 pm »
Is there an ASCII command that will send title / artist in radiotext, dynamic PS, and RT+ ??