Author Topic: E-mail test failed (Connect timed out)  (Read 14879 times)

Romolo

  • Newbie
  • *
  • Posts: 10
E-mail test failed (Connect timed out)
« on: July 19, 2013, 11:31:11 pm »
I did everything, but I'm not able to send  alarm e-mail using FM Guard or FM Scope.
Can you check if there're something wrong  in the jpg attached?
Thanks.

Rômolo/Brazil

Jan

  • Hero Member
  • *****
  • Posts: 1124
Re: E-mail test!
« Reply #1 on: July 20, 2013, 08:31:05 am »
"Connect timed out" means that the smtp server is not accessible from your computer. You are either not connected to internet or your ISP blocks default smtp port 25 (this is very often last years). Try an alternative port 587 (the smtp server must support it). Just add :587 behind the smtp server name.

More details about this issue: http://pira.cz/forum/index.php?topic=181.0

Romolo

  • Newbie
  • *
  • Posts: 10
Re: E-mail test failed (Connect timed out)
« Reply #2 on: July 22, 2013, 11:07:48 pm »
Thank you! Working  with :587!
Is possible set more than one e-mail to receive alarms?
By the way this feature is necessary to leave the device all time On in the USB port ok? Any problem in this case? I haven't AC adapter!


Jan

  • Hero Member
  • *****
  • Posts: 1124
Re: E-mail test failed (Connect timed out)
« Reply #3 on: July 23, 2013, 10:25:26 am »
You may enter more recipients separated by , (comma)

for example email.to(email1@gmail.com, email2@gmail.com)

There's no limitation in the P175 for the USB connection time.

Romolo

  • Newbie
  • *
  • Posts: 10
Re: E-mail test failed (Connect timed out)
« Reply #4 on: July 29, 2013, 06:55:24 pm »
 Ok, thannks again!
By the way, if I disconnect the antenna from P175 is possible to simulate a fail of signal quality or bad reception and test e-mail sending system?
I say this because, there's no other way to test the feature in  my station in moment.

Jan

  • Hero Member
  • *****
  • Posts: 1124
Re: E-mail test failed (Connect timed out)
« Reply #5 on: July 29, 2013, 07:42:32 pm »
Yes, it is possible if the antenna is required for proper reception (that is, the signal is <70 dBuV with antenna). Near the transmitter you may get excellent signal also without antenna.

Romolo

  • Newbie
  • *
  • Posts: 10
Re: E-mail test failed (Connect timed out)
« Reply #6 on: July 29, 2013, 09:16:46 pm »
I set the time for the messages. I enabled the function for sending emails and set up alarms. I did test sending messages and received, but did not get the message when I simulate a signal failure removing the antenna. The signal level is excellent and without the antenna signal dropped drastically and I should receive the message. Do I need to configure anything else?

Jan

  • Hero Member
  • *****
  • Posts: 1124
Re: E-mail test failed (Connect timed out)
« Reply #7 on: July 30, 2013, 07:57:39 am »
The alarm fields are grayed, so there's no alarm assigned to your station. Create a new alarm set, select and configure the alarms required and assign the alarm set to your station in station list. See the pdf for more details.

Romolo

  • Newbie
  • *
  • Posts: 10
Re: E-mail test failed (Connect timed out)
« Reply #8 on: July 30, 2013, 06:32:23 pm »
Yeah! Thanks again my friend! Working very well!  ;D
Cold be great on day if possible this feature send sms to cellphone! :)
Anyway, thanks again!
Rômolo

Jan

  • Hero Member
  • *****
  • Posts: 1124
Re: E-mail test failed (Connect timed out)
« Reply #9 on: July 30, 2013, 08:33:35 pm »
Here in Europe almost all mobile phone operators provide email address for each phone number. Sending a message to such email address effectively sends a SMS. This service is free of charge and simple to use from any platform. I don't know similar or better way.

Romolo

  • Newbie
  • *
  • Posts: 10
Re: E-mail test failed (Connect timed out)
« Reply #10 on: July 30, 2013, 09:11:54 pm »
You're right! There is options, but here is more complicated if you don't have 3G enabled. But, thanks for tips, I'll check this service mobile here and enjoy with P175. Again, thanks for support.
Rômolo

Romolo

  • Newbie
  • *
  • Posts: 10
Re: E-mail test failed (Connect timed out)
« Reply #11 on: August 06, 2013, 09:05:12 pm »
Hi! Everything working well about e-mails alarm, thanks.
If I can give a idea about update this sistem, could be interesting if the program send an email stating that the sign was in alarm returned to normal operation. Maybe not in all parameters, but the alarm signal quality or level of RF help a lot. Just a idea.
Thanks again.