Post reply

Warning - while you were reading a new reply has been posted. You may wish to review your post.
Message icon:

Unregistered users must pass a verification:

Please enter the number from the picture above which is showing FM broadcast antenna:

shortcuts: hit alt+s to submit/post or alt+p to preview

Topic Summary

Posted by: invitetactless
« on: May 22, 2024, 06:50:08 am »

The photos you provided are quite small and blurry. I can't see every detail of it clearly. Please provide sharper photos.
Posted by: Rafael Reali
« on: December 04, 2022, 05:06:02 pm »

If you are testing the circuit on a PLL transmitter, it needs to have good damping (or delay) on the correction signal, otherwise it will combat the pilot signal from the stereo generator.

  I suggest testing the stereo circuit on a free oscillator.
Posted by: quixotichare
« on: November 29, 2022, 02:46:18 am »

I also have a problem with demultiplexing, it doesn't want to be better than 35dB demultiplexing. I don't know how to solve it?
Posted by: brashtrue
« on: November 24, 2022, 04:47:46 am »

The photo you provided isn't particularly valuable. Let's get a little more specific.
Posted by: max-bit
« on: January 21, 2021, 08:08:28 pm »

I built a stereo encoder based on this project
However, I have a problem with channel separation, it doesn't want to be better than the 35dB channel separation. This is not a problem of the receiver as it has a separation of ~ 43 dB (measured on a professional generator). What could be the problem?

I am attaching the eagle drawing.

thanks in advance for your comments and help
Posted by: radium98
« on: January 13, 2016, 08:53:47 pm »

Still cant burn the hex into the pic i think the 2 pics are fakes one be aware.
Posted by: radium98
« on: January 10, 2016, 02:29:39 pm »

 :D hi i am going to make the stereo encoder and here is some pictures of the project thanks to Jan.Having 1 question i did not find the U7 - PIC18F1220-I/P  i tried to use PIC18F1320-I/P as it seems must work under the data sheet and its a bit pricy does it work or no ?