Pages: [1]

Author Topic: P132 NTP time setting won't enable  (Read 12036 times)

alexgray55

  • Newbie
  • *
  • Posts: 2
P132 NTP time setting won't enable
« on: March 29, 2024, 01:01:19 pm »
I am trying to set a P132 to use NTP time setting, but even though I have it enabled in the LAN settings, the Status page shows it as not enabled (see screenshots). I have reset the device since setting the NTP server and have tried several known-good servers, but none will take effect.

What am I doing wrong?
Logged

Jan

  • Hero Member
  • *****
  • Posts: 1168
Re: P132 NTP time setting won't enable
« Reply #1 on: March 29, 2024, 01:14:56 pm »
Such issue has never been reported yet (since 2013).
In the website go to Status - Version and post the complete version listing. Also go to Tools - Terminal and type SETLAN and confirm by Enter. Post the returned string.
Logged

Jan

  • Hero Member
  • *****
  • Posts: 1168
Re: P132 NTP time setting won't enable
« Reply #2 on: March 29, 2024, 10:00:54 pm »
If you've used Magic RDS 4 version 4.1.8 for the LAN settings setup, please update to the latest version here: http://pira.cz/rds/magicrds/MagicRDS_Setup.exe
The version 4.1.8 may corrupt LAN settings in the encoder.
Logged

alexgray55

  • Newbie
  • *
  • Posts: 2
Re: P132 NTP time setting won't enable
« Reply #3 on: March 30, 2024, 12:16:33 am »
Quote from: Jan on March 29, 2024, 01:14:56 pm
Such issue has never been reported yet (since 2013).
In the website go to Status - Version and post the complete version listing. Also go to Tools - Terminal and type SETLAN and confirm by Enter. Post the returned string.

Hi, here is version listing:
RDS encoder firmware version 2.1g
Embedded website version 2.1a
Build 2018-10-03
Ethernet module firmware version ID809p01 30.4.2015
Bootblock version 0801 9.6.2009

SETLAN string:
23:10:48 SETLAN
23:10:49 AT+iFD$AT+iWEBP=80$AT+iWPWD=*$AT+iRPG=1234$AT+iNTS1=time.nist.gov$AT+iGMTO=0$AT+iDSTD=01.LSun.03;02.LSun.10$AT+iNTOD=1$
Logged

Jan

  • Hero Member
  • *****
  • Posts: 1168
Re: P132 NTP time setting won't enable
« Reply #4 on: March 30, 2024, 12:42:03 am »
It seems to me the time sync is working normally but it is not indicated on the website. The firmware is quite old, try to update:
https://pira.cz/rds/p132fwup.zip
https://pira.cz/rds/p132webu.zip
Logged

YASPE

  • Newbie
  • *
  • Posts: 8
    • RadioES
Re: P132 NTP time setting won't enable
« Reply #5 on: February 01, 2025, 09:19:28 am »
About synchronizing the time on the encoder to be able to activate CT Group 4. Is there any possibility for the P164 encoder to have the time updated via NTP without needing to sync with a PC?
Logged

Jan

  • Hero Member
  • *****
  • Posts: 1168
Re: P132 NTP time setting won't enable
« Reply #6 on: February 01, 2025, 10:14:32 am »
Time sync is implemented in the middleware (Magic RDS 4). In Overview - Extensions, enable General - Time Synchronization. NTP is not supported at this time.
Logged

YASPE

  • Newbie
  • *
  • Posts: 8
    • RadioES
Re: P132 NTP time setting won't enable
« Reply #7 on: February 01, 2025, 12:33:00 pm »
I understand Jan. That feature would be an excellent improvement for the future.
Logged
Pages: [1]
 

+ Quick Reply