Radio Data System (RDS) > P132, P164, P232(U) and P332 RDS Encoders

P132 NTP time setting won't enable

(1/1)

alexgray55:
I am trying to set a P132 to use NTP time setting, but even though I have it enabled in the LAN settings, the Status page shows it as not enabled (see screenshots). I have reset the device since setting the NTP server and have tried several known-good servers, but none will take effect.

What am I doing wrong?

Jan:
Such issue has never been reported yet (since 2013).
In the website go to Status - Version and post the complete version listing. Also go to Tools - Terminal and type SETLAN and confirm by Enter. Post the returned string.

Jan:
If you've used Magic RDS 4 version 4.1.8 for the LAN settings setup, please update to the latest version here: http://pira.cz/rds/magicrds/MagicRDS_Setup.exe
The version 4.1.8 may corrupt LAN settings in the encoder.

alexgray55:

--- Quote from: Jan on March 29, 2024, 01:14:56 pm ---Such issue has never been reported yet (since 2013).
In the website go to Status - Version and post the complete version listing. Also go to Tools - Terminal and type SETLAN and confirm by Enter. Post the returned string.

--- End quote ---

Hi, here is version listing:
RDS encoder firmware version 2.1g
Embedded website version 2.1a
Build 2018-10-03
Ethernet module firmware version ID809p01 30.4.2015
Bootblock version 0801 9.6.2009

SETLAN string:
23:10:48 SETLAN
23:10:49 AT+iFD$AT+iWEBP=80$AT+iWPWD=*$AT+iRPG=1234$AT+iNTS1=time.nist.gov$AT+iGMTO=0$AT+iDSTD=01.LSun.03;02.LSun.10$AT+iNTOD=1$

Jan:
It seems to me the time sync is working normally but it is not indicated on the website. The firmware is quite old, try to update:
https://pira.cz/rds/p132fwup.zip
https://pira.cz/rds/p132webu.zip

Navigation

[0] Message Index

Reply