Author Topic: P132 and P332 RDS Encoder and RDS 2.0  (Read 5695 times)

tech

  • Newbie
  • *
  • Posts: 3
P132 and P332 RDS Encoder and RDS 2.0
« on: December 14, 2015, 12:52:04 am »
Hi Jan,

Does the P132 and P332 RDS Encoder support the new RDS 2.0 functions?
I am verry interested in >> Broadcaster's graphical logo – a maximum 4 kilobyte picture (JPEG, PNG, or GIF)

https://en.wikipedia.org/wiki/Radio_Data_System



Hans

Jan

  • Hero Member
  • *****
  • Posts: 1058
Re: P132 and P332 RDS Encoder and RDS 2.0
« Reply #1 on: December 14, 2015, 08:36:58 am »
No, it doesn't.

Implementation is possible in future firmware versions, however this is premature as there are currently no receivers on the market with such support and the RDS 2.0 is still only a proposal, not a standard.

Pira.cz expects general acceptance of the RDS 2.0 only in the case that the DAB project will fail. Based on poor expansion of the DAB during 20 (!) years of existence, the issue is still open.  ;)

tech

  • Newbie
  • *
  • Posts: 3
Re: P132 and P332 RDS Encoder and RDS 2.0
« Reply #2 on: December 14, 2015, 03:47:49 pm »
Here in The Netherlands several radio stations send the RDS 2.X  Logo's

I have a car radio that supports it (and no it is not a DAB radio)

So most likely aL new embedded car radio's will support the latest RDS2 in the coming year.

Some info:
http://www.rds.org.uk/2010/pdf/R15_006_5.pdf
http://www.rds.org.uk/2010/RDS2Day.htm

Jan

  • Hero Member
  • *****
  • Posts: 1058
Re: P132 and P332 RDS Encoder and RDS 2.0
« Reply #3 on: December 20, 2015, 10:22:59 pm »
Once it happens, we'll add the support. By the end of 2015, the features haven't been standardized yet so a long way remains.
The graphical logo showed by your car radio does not come via RDS channel.

tech

  • Newbie
  • *
  • Posts: 3
Re: P132 and P332 RDS Encoder and RDS 2.0
« Reply #4 on: December 25, 2015, 01:07:30 pm »
Hi Jan, correct

you can create a logo and store it into the radio
The graphical logo is a   118 x 124 .png file formats 24bits, 32bit or 48 bits are working.

The logo will be loaded when here is a match with the PI code and the .png file name


http://www.volkswagen.de/de/models/golf_7/brochure/senderlogos.html

admin

  • Administrator
  • Newbie
  • *****
  • Posts: 7
Re: P132 and P332 RDS Encoder and RDS 2.0
« Reply #5 on: December 25, 2015, 01:24:33 pm »
Thanks for the clarification.

That solution can be applied to any existing station and has the benefit that the logo is available immediately after tuning to the station. Initially, the "station logo" RDS feature will be much slower, say 5 to 30 minutes after first tuning of the station, depending on the logo size in bytes, number of RDS subcarriers and bandwidth reserved for this service. The "station logo" is planned as an ODA application so it would work with existing UECP encoders as well.

Update (October 2016): In current RDS2 draft, the logo feature has been completely removed and replaced by a general file transfer function. This file transfer function is unfortunately not compatible with RDS1 so existing RDS encoders (across all brands) will not be able to send logo using this function.