Author Topic: P175 via piracom problem  (Read 3335 times)

Günter Lorenz

  • Guest
P175 via piracom problem
« on: September 11, 2012, 09:26:07 pm »
Hi,
P175 works perfect via USB on remote PC. piracom is configured correctly (it seems), client is FM Scope on another PC in LAN, connect works, but I get strange characters between the correct control commands in the pirlog.txt and no data to the client.
I can send/upload logfile and piracom screenshot if required.
Any ideas welcome!
73,
Günter
www.fmlist.org

Jan

  • Hero Member
  • *****
  • Posts: 564
Re: P175 via piracom problem
« Reply #1 on: September 12, 2012, 08:47:55 am »
You probably have set invalid baudrate. Piracom must be configured as follows:
Baudrate 19200
Databits 8
Parity None
Stopbits 1
Flow control None

Günter Lorenz

  • Guest
Re: P175 via piracom problem
« Reply #2 on: September 12, 2012, 01:18:16 pm »
Thank you - that solved the problem!
Perhaps you could add this information to the P175 manual.
Now planning the next steps ...
73,
Günter