MagicRDS4, wrongly set TATMOUT parameter

[metro187]

When setting up the "TA Timeout and External Control", if you choose "Level controlled", the set timeout value should be shifted by 128.
So for a "2 minute timeout, Level controlled" mode, a TATMOUT=130 should be sent and instead a TATMOUT=3 is sent.

If you read back the above saved setting from the encoder it becomes "3 minutes, Falling edge controlled"

Reproduced in the latest available 4.2.4 version.

[Jan]

Yes, when sending 'level controlled' using the Magic RDS 4 form, it adds 1 instead of 128. It will be fixed in upcoming version.

Thx.

[metro187]

Thanks, Jan!

For now, we saved the config in the terminal, using:
*TATMOUT=131

[Jan]

TATMOUT=131
*TATMOUT

[metro187]

Got it, thanks for the correction.