Pira.cz Technical Forum

Radio Data System (RDS) => P132, P164, P232(U) and P332 RDS Encoders => Topic started by: gully52 on April 16, 2015, 05:02:46 pm

Title: NexGen Export to P132 via IP
Post by: gully52 on April 16, 2015, 05:02:46 pm

Searched the forums for NexGen, but only found instructions for the older Pira32 via remote COM port application.

How do I configure NexGen to output program titles to the P132 Encoder?

Also, what ports need to be forwarded through the transmitter site firewall in order for the P132 to successfully receive the exported data from NexGen at the studio?

Thanks!
Brian

Title: Re: NexGen Export to P132 via IP
Post by: Jan on April 16, 2015, 05:45:27 pm

The NexGen configuration for the P132 is exactly the same, these encoders are compatible.

On the P132 configure port 3 or port 4 as a server, select such TCP port number which is not blocked by firewall and equal to the TCP port number set in the NexGen.

Title: Re: NexGen Export to P164
Post by: k955backup on June 27, 2023, 10:39:00 pm

1st time Pira user here and I Magic RDS 4 connected to the Pira 164, in Nexgen I have the RDS Export pointed at the Pira ip address and port that is open. Anyone be willing to share screen shots on how they were able to get Nexgen to send data to Pira 164?

Title: Re: NexGen Export to P132 via IP
Post by: Jan on September 29, 2023, 08:59:31 pm

If the P164 is connected to the Magic RDS 4, just create a new Virtual port in the Magic RDS 4 and setup the Nexgen to connect to this virtual port.
There are many other options available but this one is probably the simplest.