Pira.cz Technical Forum

FM Analysis => P175 FM Analyzer => Topic started by: Günter Lorenz on September 11, 2012, 09:26:07 pm

Title: P175 via piracom problem
Post by: Günter Lorenz on September 11, 2012, 09:26:07 pm

Hi,
P175 works perfect via USB on remote PC. piracom is configured correctly (it seems), client is FM Scope on another PC in LAN, connect works, but I get strange characters between the correct control commands in the pirlog.txt and no data to the client.
I can send/upload logfile and piracom screenshot if required.
Any ideas welcome!
73,
Günter
www.fmlist.org

Title: Re: P175 via piracom problem
Post by: Jan on September 12, 2012, 08:47:55 am

You probably have set invalid baudrate. Piracom must be configured as follows:
Baudrate 19200
Databits 8
Parity None
Stopbits 1
Flow control None

Title: Re: P175 via piracom problem
Post by: Günter Lorenz on September 12, 2012, 01:18:16 pm

Thank you - that solved the problem!
Perhaps you could add this information to the P175 manual.
Now planning the next steps ...
73,
Günter