Posted by: metro187
« on: April 28, 2025, 07:13:59 pm »Got it, thanks for the correction.
News:
Thank you for using this forum as the technical support base for your device.
● You can format the text and attach screenshots, photos and RDS Spy records
● Faster reply: 50 % of questions are answered within 30 minutes
● You don't need to register (but registration is possible)
● The members represent a wide range of experts
● The resolution will be helpful to other users
● You'll be notified by email about new post
Posted by: Jan
« on: April 28, 2025, 07:02:51 pm »TATMOUT=131
*TATMOUT
*TATMOUT
Posted by: metro187
« on: April 28, 2025, 06:27:36 pm »Thanks, Jan!
For now, we saved the config in the terminal, using:
*TATMOUT=131
For now, we saved the config in the terminal, using:
*TATMOUT=131
Posted by: Jan
« on: April 25, 2025, 08:55:05 pm »Yes, when sending 'level controlled' using the Magic RDS 4 form, it adds 1 instead of 128. It will be fixed in upcoming version.
Thx.
Thx.
Posted by: metro187
« on: April 25, 2025, 04:42:11 pm »When setting up the "TA Timeout and External Control", if you choose "Level controlled", the set timeout value should be shifted by 128.
So for a "2 minute timeout, Level controlled" mode, a TATMOUT=130 should be sent and instead a TATMOUT=3 is sent.
If you read back the above saved setting from the encoder it becomes "3 minutes, Falling edge controlled"
Reproduced in the latest available 4.2.4 version.
So for a "2 minute timeout, Level controlled" mode, a TATMOUT=130 should be sent and instead a TATMOUT=3 is sent.
If you read back the above saved setting from the encoder it becomes "3 minutes, Falling edge controlled"
Reproduced in the latest available 4.2.4 version.